DragonForce 65 V6  ARTR - No Radio
DragonForce 65 V6  ARTR - No Radio
DragonForce 65 V6  ARTR - No Radio
DragonForce 65 V6  ARTR - No Radio
DragonForce 65 V6  ARTR - No Radio

DragonForce 65 V6 ARTR - No Radio

£132.50 (ex. VAT)
RRP: £179.99
Stock Status: In Stock
Latest updates, in stock, next weekday dispatch, FREE UK postage to P/F zone 1

DragonForce 65 Version 6 ARTR - Supplied without radio system.

With all the latest updates: "New rudder post fitting, main-boom and boom adjusters".  Link: Buyers Guide

From stock, next weekday dispatch, free UK postage for Parcelforce zone 1 & discounted for zones 2 & 3.

Ready to install your preferred radio system – we recommend using a system that has “End point adjustment” to have the ability to adjust the travel on the servos. We also recommend installing one of our rechargeable packages to fit the battery beside the fin box - We supply an extension lead & self adhesive Velcro’s with all our DF65 yachts for this conversion.

Buy with confidence - Full support and knowledge base - Informed advise
RC Yachts are part of the team that conceived and developed this great yacht.
 We have the worlds largest stock of DF Racing spares and accessories to keep you sailing.  

Introduction: Our yachts have been developed for racing, so they not only look good but actually sail. With 11 different tuning adjustments, the sail shape can be altered to obtain a balanced performance both up & down wind. With the carbon mast, there is less rigging so no shrouds & spreaders - makes for easy setup. Product support is available across the world & with the spares & accessories including 3 further rigs/sails to keep you sailing in almost any wind condition. Join over 35,000 skippers sailing/racing DF65's & DF95's around the world.

Everything is in the box: It takes at least a couple of hours to complete the build with the comprehensive instructions by the main designer John Tushingham. The yachts are constructed with servos fitted - fin, ballast & rudder just slot in. The supplied "A" carbon rig is part built ready to attach the sails & sheeting - stand is also supplied. Just install your radio system and batteries & you are sailing!

DF65 Version 6: The DragonForce 65 has undergone a major transformation to bring the quality and appearance up the high standard set by its bigger brother the DragonFlite 95, without affecting the competitiveness of previous versions. New tooling for the hull sees an increase in hull strength (retaining the same shape and weight). Key rig fittings, the Gooseneck, Compression Strut, Masthead Fitting and Jib Boom front end fittings are new designs for maximum efficiency and easier assembly. The sails are now made from 50 micron Mylar film in a clean new style. The digital rudder servo also gets a 10% boost in torque and improved electronics.

Information Links:
World Information Site - UK Association Site - Instruction Manual - Class Rules

Length: 650 mm
Beam: 116.5 mm
Rig Height: 915 mm
Overall Height: 1338 mm
RTR Total weight: 1200g (Batteries not included)
Sail Area (Mainsail): 1460 cm2
Sail Area (Jib): 766 cm2
Sail Area (Overall): 2226 cm2
Hull Material: Moulded ABS with painted finish and logo sticker
ARTR version (8815) - without radio system
Boat box dimensions: 91.2 x 30.4 x 11.6

What's Included:
Fully Painted, Moulded ABS Hull
50 micron Mylar film racing sails with painted flow stripes and logo
Extruded carbon fibre mast and boom tubes
Extruded aluminium keel with zinc alloy ballast bulb
Metal geared digital rudder servo and fast, powerful sail winch
Display stand (Moulded plastic and glass fibre tubes)

Requires radio system and batteries.

  • MPN:
  • GTIN:
    Does Not Apply
  • Brand:
  • Condition:
  • Product Code:
  • Weight:
Based on 3 review(s)
Write an online review and share your thoughts with other shoppers!
Catherine Erine - Lausanne, Switzerland

Great boat

This was my first ever RC model. Very comprehensive build guide: only few hours to assemble for complete beginners. Easy to find on the web rig adjustment instructions that make your sailing as easy as it can be. Not a droplet inside the hull even after 2-3 hours of sailing in high wind with some waves + abundant rinsing by fresh water (after sailing in the sea). Even with standard A sail plenty of fun with winds from 3 to 20 knots. A really nice boat to start RC sailing and progress rapidly!

Ken Jones - Etherow Model Boat Club - Stockport

Quick efficient service

Great service, very good price. Highly recommended

Stefan Schrader -

Pretty fine boat

I received my order after a few days in Germany.

Everything looks great and is of great quality.

What you need to build:

a big cup of tea, tweezers for the little knots and a very sharp knife for the Dyneema ropes.

And calm fingers ...

And cut the ropes some cm longer.

With the basic trim, the boat is already sailing very well and is great fun.

And last but not least: good after sale service.

Thank you.

Best regards